Raymarine A series, Installation And Operation Instructions Manual

Page: 75 / 464

6. On the multifunction display, select OK in the
message dialog.
The multifunction display will search for active
Bluetooth devices.
7. Select Stop Discovery when your device
appears in the list.
8. Select the media player device in the list.
A pairing request message is displayed on the
external media device.
9. On the external media device, select Pair
(or equivalent) to accept the pairing request
message.
The multifunction display shows a message
asking you to confirm the Pairing code.
10. If the pairing code displayed on the multifunction
display matches the code displayed on the
external media device, select
Ok on the
multifunction display. If the code does NOT
match, repeat steps 4 to 8.
11. If the pairing was successful the multifunction
display will confirm the pairing.
The external media device is now paired with the
multifunction display.
Enabling audio control
With the homescreen displayed:
1. Select
Set-up .
2. Select System Settings .
3. Select Wireless Connections .
4. Select Connection Manager .
5. Select the media player device in the list.
6. Select
Audio Control > On .
Media player controls
Touchscreen multifunction displays enable you to
use the on-screen media player controls to control
the audio playing on your external media player.
D12293-1
1
3 2 4 5
1. Touch this icon to display the audio controls.
2. Previous track.
3. Play track.
4. Pause track.
5. Next track.
Selecting Back will hide the audio controls.
Media player controls using a remote
control
You can control audio wirelessly using a Raymarine
RCU-3 remote control unit.
The Shortcut key on the RCU-3 must be set to
Start/Stop audio playback, refer to the
Using a
Remote control section for further details.
1. Press UP arrow for next track.
2. Press DOWN arrow for previous track.
3. Press SHORTCUT button to play/pause audio.
Note: On New c Series multifunction displays,
whilst the audio controls appear on the screen you
cannot interact with them. To control audio you
must use a connected RCU-3.
Unpairing a Bluetooth device
If you are experiencing problems when attempting to
use a Bluetooth device with the multifunction display
it may be necessary to unpair the device (and any
other paired Bluetooth devices) and then retry the
pairing procedure.
With the homescreen displayed:
1. Select
Set-up .
2. Select System Settings .
3. Select Wireless Connections .
4. Select Connection Manager .
5. Select the media player device in the list.
6. Select
Unpair / Forget this device .
Cables and connections 75