Raymarine A series, Installation And Operation Instructions Manual, Page: 150 / 464

External devices menu
This menu enables you to configure the external devices connected to the display.
Menu item Description Notes
Pilot Set-up When connected to an Evolution autopilot
this option allows you to enable and
disable pilot control and the pilot bar. You
can also access certain pilot settings and
modes.
Fishfinder Set-up Enables you to select an external
transducer and configure the options
for the unit, such as depth offset. Also
enables you to configure the options for
an internal or external sonar module. For an explanation of these options refer
to the
Transducer set-up menu options
described in the Fishfinder section of this
document.
AIS Unit Set-up Enables you to configure additional
functions for AIS units, such as Silent
Mode. This menu item is only available
when an AIS unit is detected or when
Simulator mode is On. For an explanation of these options refer
to the
AIS menu options described in the
AIS section of this document.
Remote Control Enables you to customize certain controls
for Raymarine Bluetooth remote control
units (for example, RCU-3). For an explanation of these options refer
to the
Remote Control section of this
document.
Transducers Set-up Displays a list of connected transducers
which you can select and calibrate.
Weather Set-up Enables you to select the bus your
weather receiver is connected to:
• SeaTalk hs
• SeaTalk ng
Switch Panel Set-up Enables you to install and uninstall
Switch Panel configuration files.
External Keypad Enables you to pair and unpair remote
keypads.
Engines Set-up Enables you to run the engine
identification wizard For an explanation of these options refer
to
Engine identification wizard section of
this document.
150 a Series / c Series / e Series