Raydec MT5 Operating Manual Download Page 43

Page: 43 / 88

MT5 Multi-Tracer Operating Manual

page 43

4.6. Direct Hardware Interface

In addition to the web interface, MT5 control units running software version 5.08, or

newer, provide a simple user interface via a keyboard and video monitor directly

connected to the MT5 control unit. In order to use this feature, connect a standard

computer keyboard to either of the USB host ports on the front of the MT5 control unit.

Connect a standard video monitor to the video port, also located on the MT5 control unit

front panel. This is a VGA (or analog) type video connection.

You may immediately

see the simple menu. If not, press the “enter” key on the

keyboard and the menu should appear on the screen. The menu should look similar to

the example shown below:

1) Network Setup

2) Learn System

3) Show System Configuration

4) Reset Passwords

Refer to section 6.1.1

“Network Change via Keyboard and Monitor” for details on the

network settings. Refer to section 10

“System Expansion and Configuration” for details

on the “Learn System” and “Show System Configuration” menu items. Refer to section

6.4

“Network Security, Usernames and Passwords” for details on system passwords.

nter the appropriate number and press “enter” to make that menu selection.

Warning: DO NOT access these features unless necessary. Some of the

options accessed by this interface affect the basic operation of the unit.

Indiscriminant changes may disable the Multi-Tracer system causing a

possible loss of data.

Summary of Contents for MT5

























































































Search results

Summary of Contents for MT5

Reviews:

Related manuals for MT5

Brands by name

Popular brands

Raydec MT5, Operating Manual

Search results

Summary of Contents for MT5

Reviews:

Related manuals for MT5

Brands by name

Popular brands