MT5 Multi-Tracer Operating Manual
page 21
4.2. IV Curve Data Tab
The “IV Curve Data” tab displays information on the last IV curve taken for each module
channel. This page displays key information such as peak-power, Voc and Isc values. In
addition to displaying the last IV curve taken, this screen is used to manually take IV
curves.
Figure 13. IV curve data table.
To take an IV curve of all modules, press the “Take All Curves” button. To take selected
curves, use the check boxes to enable a subset of curves and then press the “Take
Selected Curves” button.
These settings have no effect on automatic IV curves and are only used to manually
take IV curves. The Multi-Tracer takes manual curves independent of any settings that
affect automatic IV curves.
Note: IV curves take a significant amount of time. Commonly 2-3 seconds per module.