Raydec MT5 Operating Manual Download

Page: 26 / 88

MT5 Multi-Tracer Operating Manual

page 26

•

Off

– Keep this module’s load turned off. Therefore the module will operate in an

open-circuit condition.

•

Peak Power

– Operate the module in a peak-power tracking mode (see Appendix B

“Peak-Power” tracking for details).

•

Fixed Voltage

– This mode operates the module at the fixed voltage given. Enter the

voltage in the associated box.

Enable Auto IV Curves

This check box enables this module for automatic IV curves. See the section 4.3.5

“IV

Curves Setup” for additional details. This setting determines if an IV curve is taken

automatically for this module

when the “Global IV Curve Mode” is set to “Channel

Defined”. See the section 4.3.1 “Global Load & IV Curve Control” for details on

overriding this setting.

Integration Period

The “Integration Period” setting defines the number of microseconds used for module

voltage and current data sampling. The default 100 uS is recommended and should not

be changed unless necessary. Larger values will help reduce signal noise by averaging

the signal over a longer period.

Summary of Contents for MT5

























































































Search results

Summary of Contents for MT5

Reviews:

Related manuals for MT5

Brands by name

Popular brands

Raydec MT5, Operating Manual

Search results

Summary of Contents for MT5

Reviews:

Related manuals for MT5

Brands by name

Popular brands