Raven AutoBoom XRT, Calibration & Operation Manual

Page: 47 / 72

P/N 016-0235-001 Rev. B 43
SETTINGS
To enter a feature unlock code and enable a feature:
1. Select Settings on the XRT home screen.
2. Select the Unlocks
tab.
3. Select the padlock icon next to the feature to be unlocked.
4. Enter the feature unlock code.
NOTE: Dashes may be omitted, letters may be entered in either upper or lower case.
5. Touch the check box to submit the entered code.
NOTE: A message will display indicating whether or not the unlock code that was entered is valid. If the code
is valid, the padlock icon next to the feature will turn green and indicate that it is unlocked as shown
in Figure 35 on page 42.
After unlocking a feature, a calibration is required before any XRT function can be used.