Ravelli Hydro, Manual

Page: 144 / 333

Use and maintenance manual Touch Radio Hydro
Pag.35
Rev.0 18/05/2021
EN
The submenus of the USER MENU (the only one accessible for the end user) are the following:
Menu VENTILATION
Menu SET POWER
Menu CHRONOTHERMOSTAT
Menu LOADING AUGER
Menu SET AIR-PELLET
Menu STOVE STATUS
Menu COMFORT CLIMA
Menu SETTING
Ventilation
The stoves that have ventilation have the ability to heat the environment also thanks to the ventilation.
📌
The temperature read by the handheld unit controls the modulation of the stove. If you want to adjust the ventilation by ad-
justing the stove, set the fan to A mode as shown in the relative chapter.
Ventilation can be set from 0 (OFF) to 3 (maximum value). If you set value A (automatic), the ventilation follows the set power of the
stove.
📌
In some models, changing the fan speed may be limited. See the paragraph “Description of operation”.
Set power
These stoves have been designed to automatically adjust the power according to the thermal demand. However, you can choose to
run it at minimum power using this function.
📌
The power selection is effective only in the working state of the thermo-stove. At each restart, the value is automatically reset
to MAX.
Chronotermostat
With the Chronothermostat function you can program the automatic switch ON/OFF of the stove in 4 independent time intervals (SET
CHRONO 1-2-3-4).
To enable the function, access the CHRONOTHERMOSTAT menu and then the ACTIVATE CHRONO function
To modify one of the 4 available programs, select the CRONO program to be modified and enter the modification screen.
USER
VENTILATION
SET POWER
CHRONOTHERMOSTAT
LOADING AUGER
USER
SET AIR-PELLET
STOVE STATUS
COMFORT CLIMA
SETTING
Press the increase/decrease keys “increase/decrease” to change the ventilation.
Using the “UP” and “DOWN” keys it is possible to modify the working power
VENTILATION POWER
SELECT POWER
ACTIVATE CHRONO
ACTIVATE CHRONO