26
Content of the EC declaration of conformity (with reference to point 1.7.4.2, letter c) of directive
2006/42/EC)
With reference to annex II, part 1, section A of directive 2006/42/EC, the declaration of conformity
accompanying the machinery contains:
1.
the business name and full address of the manufacturer and, where applicable, its authorised
representative;
See the first page of the manual
2.
name and address of the person authorised to compile the technical file, who must be established
in the Community;
It coincides with the manufacturer, see the first page of the manual
3.
description and identification of the machine, including generic name, function, model, type, serial
number, trade name;
See the first page of the manual
4.
a statement explicitly declaring that the machinery is in conformity with all the relevant provisions
of this directive and, where appropriate, a similar statement declaring conformity with other
community directives and/or relevant provisions with which the machinery complies. These
references must be those of the texts published in the Official Journal of the European Union;
The machinery must comply with the following applicable Directives:
2006/42/EC
Machinery Directive
2014/30/EU
Electromagnetic Compatibility Directive
2014/35/EU
Low Voltage Directive
5.
where appropriate, the name, address and identification number of the notified body which carried
out the EC type-examination referred to in annex IX and the number of the EC type-examination
certificate;
N/A
6.
where appropriate, the name, address and identification number of the notified body which
approved the full quality assurance system referred to in annex X;
N/A
7.
where appropriate, reference to the harmonised standards referred to in article 7, paragraph 2,
which have been applied;
UNI EN ISO 12100:2010
Safety of machinery - General principles for design - Risk
assessment and risk reduction;
UNI EN 1493:2010
Vehicle lifts;
IEC EN 60204-1:2006/AC:2010
Safety of machinery - Electrical equipment of machines -
Part 1: General requirements
8.
where appropriate, reference to other standards and technical specifications applied;
N/A
9.
place and date of declaration;
Sasso Marconi,
/
/
10.
identification and signature of the person authorised to draw up the declaration on behalf of the
manufacturer or its authorised representative.
SIMONE FERRARI VP VSG Europe Managing Director
0496-M004-0
