21
21
c
WARNING
Clear area if vehicle
is in danger of falling.
c
WARNING
Position vehicle
with center of gravity
midway between
adapters.
SAFETY
INSTRUCTIONS
c
Do not operate
a damaged lift.
c
Authorized personnel
only in lift area.
CAUTION
c
WARNING
Remain clear of lift
when raising or
lowering vehicle.
c
WARNING
Avoid excessive
rocking of vehicle
while on lift.
c
CAUTION
Use vehicle
manufacturer’s
lift points.
c
CAUTION
Always use
safety stands when
removing or installing
heavy components.
c
Do not override
self-closing
lift controls.
WARNING
c
WARNING
Keep feet
clear of lift
while lowering.
c
CAUTION
Use height extenders
when necessary
to ensure
good contact.
c
CAUTION
Auxiliary adapters
may reduce
load capacity.
The messages and pictographs
shown are generic in nature and
are meant to generally represent
hazards common to all automotive
lifts regardless of specific style.
Funding for the development and
validation of these labels wa
s
provided by the Automotive Lift
Institute, PO Box 33116 Indialantic,
FL. 32903-3116.
They are protected by copyright.
Set of labels may be obtained from
ALI or its member companies.
C 1992 by ALI, Inc. ALI/WL101s
SAFETY
INSTRUCTIONS
Proper maintenance
and inspection
is necessary
for safe operation.
c
SAFETY
INSTRUCTIONS
c
Read operating
and safety manuals
before using lift.
SAFETY
INSTRUCTIONS
c
Do not operate
a damaged lift.
MAINTENANCE INSTRUCTIONS
If you are not completely familiar with automotive
lift maintenance procedures; STOP: Contact factory
for instructions. To avoid personal injury, permit only
qualifed personnel to perform maintenance on this
equipment.
•
Always keep bolts tight. Check periodically.
•
Always keep lift components clean.
•
Always if oil leakage is observed, call local
service representative.
•
Always if electrical problems develop, call local
service representative.
•
Daily: Check cables and sheaves for wear.
Observe for frayed cable strands. Wipe
cables with a rag to detect hard to see small
broken cable strands. Replace cables showing
any broken strands. Replace worn parts as
required with genuine parts.
•
Daily: Inspect adapters for damage or
excessive wear. Replace as required with
genuine parts.
•
Monthly: Check equalizer cable tension. Adjust
per lift installation instructions. If there are no
more threads available for adjustment, replace
the cable. Do not use washers to stand off the
nut to use previously used threads.
•
Monthly: Lubricate the six inside corners of the
columns with heavy duty bearing grease.
•
Monthly: Lubricate locking latch shafts. Push
latch handle several times for oil to penetrate
pivot points.
•
Every 3 Months: Check anchor bolts for
tightness. Anchors should be torqued to 90 ft/
lbs (122 Nm).
•
Semi-Annually: Checkfuid level of lift power
unit and refill if required per lift installation
instructions.
•
Replace all caution, warning or safety related
decals on the lift if unable to read or missing.
0496-M004-0
