7.5
Discharging residual material
Empty the machine daily after use. This prevents corrosion and clogging and the properties of the
fertilizer are maintained.
7.5.1
Safety instructions
DANGER!
Risk of injury due to rotating spreading discs
Working on the machine with the engine running and rotating spreading discs may result in serious
injury caused by mechanical components and escaping fertilizer.
u
Prior to discharge of residual material, disassemble the spreading discs.
u
Ensure that nobody is present in the hazard zone.
Also ensure the following specific preconditions:
•
The machine is parked on even and solid ground and secured against tilting and rolling.
•
During discharge of residual material, the machine is coupled to the tractor.
•
Nobody is present in the hazard zone.
•
AXIS-PowerPack:
○
The spreading discs are disassembled. See
7.4.4.2 Dismounting and mounting spreading
u
Manually move the drop point above the adjustment center or electronically to position 0.
The drop point adjustment of the fertilizer spreading unit with the VarisSpread VS pro function is
actuated electronically. A message indicates that the drop point is temporarily set to drop point
position 0 during discharge of residual material.
Observe the separate AXENT ISOBUS operator’s manual. and the "Fast emptying" section.
7.5.2
Emptying the machine
Residual material is discharged by opening the pre-metering slides and activating the conveyor belt.
u
Position a collection vessel under the fertilizer spreading unit.
u
The discharge of residual material is started via the AXENT ISOBUS machine control unit.
u
Simultaneously, start discharging residual material at the spreading unit via the AXENT ISOBUS
machine control unit.
u
Follow the instructions on the screen.
u
After completely emptying the spreading material hopper, clean the machine. See
7. Spreading operation
74
5903360
AXENT 90.1
Summary of Contents for AXENT 90.1
Page 119: ...12 Appendix 12 Appendix AXENT 90 1 5903360 119...
Page 126: ......
