Rauch AXENT 90.1, Operator'S Manual, Page: 66 / 126

Full border spreading in normal fertilizing mode refers to a spreading technique in which a bit more
fertilizer lands beyond the border of the field. Therefore, there is just a slight underfertilization at the
field boundary.
u Enter the values from the fertilizer chart in the Fertiliser settings menu:
w
Application rate
w
Working width
w
Drop point
w
Bound. sprd.type: select Full bord..
w
Applic. rate (%)
The display at the screen may vary depending on the configured software version.
• Observe the separate operator’s manual of the AXENT ISOBUS machine control unit.
u
In the main menu, activate the full border spreading function.
The settings in the Fertiliser settings menu are applied.
The currently selected mode is displayed in the top of the operating screen.
u Follow the instructions of the separate AXENT ISOBUS operator’s manual.
7.4.4 Setting the working width
n Selecting the correct spreading disc
Various spreading discs are available for implementation of the working width depending on the
fertilizer type.
Disc type Working width
S4 18 m - 28 m
S6 24 m - 36 m
S8 30 m - 42 m
S10 32 m - 48 m
S12 42 m - 50 m
There are two different, permanently installed spreader vanes on every spreading disc. The spreader
vanes are labeled in accordance with their type.
7. Spreading operation
66
5903360 AXENT 90.1