3.8
Maintenance and service
Maintenance and service involve additional hazards that do not occur during operation of the machine.
For this reason, take particular care when carrying out maintenance and service work. Work
particularly thoroughly and cautiously.
3.8.1
Qualifications of maintenance personnel
•
Only specialist workshops or approved brake repair service providers may perform adjustment or
repair work on the brake system.
•
Only qualified personnel may perform repair work on wheels and tires. They must use appropriate
mounting tools for this.
•
Welding and work on the electrical and hydraulic systems is to be carried out by qualified
technicians only.
3.8.2
Wear parts
•
The maintenance and service intervals described in the present operator’s manual are to be
strictly adhered to at all times.
•
Also observe the maintenance and service intervals for the supplied components. See the
supplier documentation for the relevant intervals.
•
We recommend having your dealer check the condition of the machine, particularly fastening
components, safety-relevant plastic components, the hydraulic system, metering components and
spreader vanes, after every working season.
•
Spare parts must at least comply with the technical standards specified by the manufacturer.
Compliance with technical requirements is ensured using original spare parts.
•
Self-locking nuts are designed to be used only once. Always use new self-locking nuts to fasten
components (e.g., when replacing spreading vanes).
3. Safety
AXENT 90.1
5903360
17
Summary of Contents for AXENT 90.1
Page 119: ...12 Appendix 12 Appendix AXENT 90 1 5903360 119...
Page 126: ......