Rauch AXENT 90.1, Operator'S Manual, Page: 52 / 126

6.5.2 Ball coupling
Variant A
ü The PTO shaft is switched off.
ü The holding-down clamp of the ball coupling is open.
u
Start the tractor.
u Position the tractor at the machine.
u
Precisely position the ball coupling of the tractor under the coupling bracket of the machine.
u Pull the hand brake of the tractor.
u
Open the valve on the support stand until the ball coupler is resting on the ball head.
The support stand is retracted automatically. See 6.5.4 Folding away the support stand
u Close the valve on the support stand.
u
Switch off the tractor engine. Remove the ignition key.
u Close the holding down clamp.
w
Please refer to the instructions of the tractor manufacturer.
The connection is secured.
6.5.3 Hitch coupling
Variant B
ü The PTO shaft is switched off.
ü The hydraulic system is switched off.
ü The holding-down clamp of the ball coupling is open.
u Start the tractor.
u
Position the tractor at the machine.
u Set the height of the hydraulic support stand to ensure that the hitch ring is precisely engaged into
the hitch hook of the tractor.
u
Pull the hand brake of the tractor.
u Switch off the tractor engine. Remove the ignition key.
u
Close the holding down clamp.
w Please refer to the instructions of the tractor manufacturer.
The connection is secured.
6. Commissioning
52
5903360 AXENT 90.1