9.2
Cleaning the machine
n
Cleaning
Spreading material and dirt promote corrosion. Although the machine components are made from
corrosion-free material, we recommend that you clean the machine immediately after each use to
maintain its value.
u
Only clean oiled machines at washing points fitted with an oil separator.
u
When cleaning with high-pressure, never aim the water jet directly at warning signs, electrical
equipment, hydraulic components, and sliding bearings.
u
After cleaning, treat the
dry
machine,
especially the stainless steel parts
, with an
environmentally friendly anti-corrosion agent.
w
A suitable polishing kit can be ordered from authorized dealers for treating rust spots.
9.2.1
Cleaning the bearings of the guide rollers
n
Bearings of the guide rollers
During spreading, dust and dirt accumulate at the guide rollers of the conveyor belt.
u
Clean the guide rollers. For this purpose, open the side covers.
Below, opening the side cover is described. Proceed respectively for all side covers. On every side of
the machine, the guide rollers are covered by 3 side covers.
u
Insert the adjustment lever through the side
cover into the sheet metal guide.
u
Lift the adjustment lever.
The locking mechanism is disengaged.
The side cover is unlocked.
Fig. 49: Using the adjustment lever
9. Maintenance and service
84
5903360
AXENT 90.1
Summary of Contents for AXENT 90.1
Page 119: ...12 Appendix 12 Appendix AXENT 90 1 5903360 119...
Page 126: ......
