Raritan Dominion KX II, User Manual

Page: 177 / 330

Chapter 7: Device Management
167
Blade chassis Required/recommended action
IBM/Dell
Auto-Discovery
•
It is recommended that Auto-Discovery be enabled when
applying blade level access permissions. Otherwise, set
access permissions on a blade-chassis wide basis.
•
Secure Shell (SSH) must be enabled on the blade chassis
management module.
•
The SSH port configured on the blade chassis management
module and the port number entered on the Port Configuration
page must match.
IBM KX2 Virtual
Media
•
Raritan Dominion KX II virtual media is supported only on IBM
BladeCenter Models H and E. This requires the use of the
D2CIM-DVUSB. The black D2CIM-DVUSB Low-Speed USB
connector is attached to the Administrative Management
Module (AMM) at the rear of the unit. The gray
D2CIM-DVUSB High-Speed USB connector is attached to the
Media Tray (MT) at the front of the unit. This will require a
USB extension cable.
Note: All IBM BladeCenters that use AMM must use AMM firmware
version BPET36K or later to work with the Dominion KX II.
Note: In the case of IBM Blade Center Models E and H, the Dominion KX
II only supports auto-discovery for AMM[1] as the acting primary
management module.
Blade Chassis Sample URL Formats
This table contains sample URL formats for blade chassis being
configured in the Dominion KX II.
Blade chassis Sample URL format
Dell M1000e
•
URL: https://192.168.60.44/cgi-bin/webcgi/login
•
Username: root
•
Username Field: user
•
Password: calvin
•
Password Field: password
Dell 1855
•
URL: https://192.168.60.33/Forms/f_login
•
Username: root
•
Username Field: TEXT_USER_NAME
•
Password: calvin
•
Password Field: TEXT_PASSWORD
IBM
BladeCenter E
or H
•
http://192.168.84.217/private/welcome.ssi