Raritan Dominion KX II, User Manual

Page: 173 / 330

Chapter 7: Device Management
163
Supported CIMs for Blade Chassis
The following CIMs are supported for blade chassis being managed
through the Dominion KX II:
•
DCIM-PS2
•
DCIM-USBG2
•
D2CIM-VUSB
•
D2CIM-DVUSB
Following is a table containing supported CIMs for each blade chassis
model that the Dominion KX II supports.
Blade chassis Connection method Recommended
CIM(s)
Generic If a D2CIM-VUSB or D2CIM-DVUSB is used
when connecting to a blade-chassis
configured as Generic, you will be able to
select the USB profiles from the Port
Configuration page and the client's USB
Profile menu. However, virtual media is not
supported for generic blade chassis and the
Virtual Media menu is disabled on the client.
•
DCIM-PS2
•
DCIM-USBG2
Dell PowerEdge
1855 Includes one of the three KVM modules :
•
Analog KVM Ethernet switch module
(standard)
•
Digital Access KVM switch module
(optional)
•
KVM switch module (standard on systems
sold prior to April, 2005)
These switches provide a custom connector
that allows two PS/2 and one video device to
be connected to the system.
Source: Dell PowerEdge 1855 User Guide
•
DCIM-PS2
Dell PowerEdge
1955 One of two types of KVM modules may be
installed:
•
Analog KVM switch module
•
Digital Access KVM switch module
Both modules enable you to connect a
PS/2-compatible keyboard, mouse and video
monitor to the system (using a custom cable
provided with the system).
Source: Dell PowerEdge 1955 Owner's
Manual
•
DCIM-PS2