Raritan COMMANDCENTER 2.20 -, User Manual

Page: 37 / 150

C
HAPTER
4: C
OMMAND
C
ENTER
M
ANAGEMENT
25
Edit User Group Policies
Groups can be assigned policies, or permissions, that allow them to view and/or control devices and ports.
Depending on which policies are assigned to them, groups might have: No Rights, Some Rights, Control
Rights, or Full Administration Rights. Policies can be set up using
Policy Manager commands, as
described in the section Policy Manager, later in this chapter.
1. Click on the Users tab and select a group.
2. On the User menu, click Edit User Group Policies . The Edit User Group Policies screen appears.
Figure 25 Edit User Group Policies Screen
3. Click on a line item in the Policies list (under the All Policies panel) that you wish to assign to the
group. Scroll up or down to view all policies in this list. Click on the Day(s) check boxes to select
which days of the week the policy should be assigned.
4. Click Add to add the policy to the Selected Policies panel and assign it to the group.
5. To remove an assigned policy from the Selected Policies list, select the policy line item and click
Delete .
6. Click OK to add the policy or policies to the group or Cancel to exit without editing. A Group
Policies Updated Successfully message confirms that policies have been updated.
7. Repeat steps 1 through 6 to edit other groups’ policies.