Raritan COMMANDCENTER 2.20 -, User Manual

Page: 113 / 150

C
HAPTER
5: A
DMINISTRATION
T
OOLS
101
To Set Secondary CommandCenter Node (In The Same Subnet):
1. Click Discover CommandCenters at the bottom of the screen. Your CommandCenter will scan the
local network and add any other CommandCenter units it finds to the table above.
2. Select a CommandCenter to add to the cluster as a Secondary Node from the Cluster Configuration
table. This second CommandCenter’s version under the
CommandCenter Version column must
match your primary node’s version.
3. Enter an administrator username and password for that unit in the Backup Username and Password
field.
Figure 134 Selecting Secondary Node from Cluster Configuration table
4. Click Join “Backup” Node.
5. A confirmation message will appear. Click Yes to assign Secondary status to the selected node, or
click No to Cancel .
Figure 135 Confirmation of Secondary Node Selection
6. After you click Yes , CommandCenter will restart the newly selected Secondary node. This process can
take several minutes. When restart is complete, a confirmation message appears on your screen.
7. On the Setup menu, click Cluster Configuration to view the updated Cluster Configuration table.