8
FRONT PANEL: MONO 4-WAY AND 5-WAY CONFIGURATION
Observe the labels screened
below
the controls for Mono operation.
1.
Master Level Control:
Sets the overall level of the entire unit in Mono mode, without changing relative
settings of the individual Sub/Low/Mid/High Outputs. Unity gain for all level controls is “7”.
2.
Subwoofer Level Control:
Sets the level of signal going to the Sub Output.
3.
Subwoofer Mute Switch:
Removes all signal from the Sub Output when pressed to the
in
position.
4.
Subwoofer Delay Control:
In Subwoofer applications this control has virtually no effect and will normally be
set to MIN (minimum).
5.
Sub / Low Crossover Frequency Selector:
This selector sets the crossover frequency between the
Subwoofer and Low outputs.
6.
Low Level Control:
Sets the Level going to the Low frequency output.
7.
Low Mute Switch:
Removes all signal from the Low output when pressed
in
.
8.
Low Delay Control:
Adds from 0 to 2 ms of time delay to the Low output only.
9.
Low / Mid Crossover Frequency Selector:
Sets the crossover frequency between the Low and Mid
frequency outputs.
10.
Mid Level Control:
Sets the level of signal going to the Mid output only.
11.
Mid Mute Switch:
Removes all signal from the Mid output when pressed
in
.
12.
Mid Delay Control:
Adds from 0 to 2 ms of time delay to the Mid frequency output only.
13.
Mid / High-Mid Crossover Frequency Selector:
Sets the crossover frequency between the Mid and High-
Mid outputs.
* NOTE: Both the Channel 1 High Level control and Channel 2 Master Level control are automatically bypassed
when the AC 23S is switched to “Mono” on the back panel. Adjusting these controls has no effect in the Mono
mode. The High-Mid Level control, High-Mid Mute switch, High-Mid Delay control and High-Mid / High
Frequency control will have no effect regardless of their settings when the AC 23S is switched to “Mono 4W”
on the back panel.
14.
High-Mid Level Control (5-way only):
Sets the level of signal going to the High-Mid output.
15.
High-Mid Mute Switch (5-way only):
Removes all signal from the High-Mid output when pressed to the
in
position.
16.
High-Mid Delay Control (5-way only):
Adds from 0 to 2 ms of time delay to the High-Mid output only.
17.
High-Mid / High Crossover Frequency Selector (5-way only):
Sets the crossover frequency between the
High-Mid and High
Frequency outputs.
18.
High Level Control:
This controls the level of signal to the High output only.
19.
Power Indicator:
If the power cable is connected and this yellow LED is lit, then the unit ready to operate.
MONO 4W OR 5W: INACTIVE
4W: INACTIVE
4W: INACTIVE
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
MAX
MIN
2
4
8
6
MAX
MIN
2
4
8
6
MAX
MIN
2
4
8
6
MAX
MIN
2
4
8
6
100
80
900
850
150
200
240
750
600
400
190
250
7.0k
5.8k
550
475
350
700
2.0k
2.8k
4.5k
1.0k
190
250
7.0k
5.8k
550
475
350
700
2.0k
2.8k
4.5k
1.0k
1k
70
4W: MID / HIGH
2W: INACTIVE
2W: INACTIVE
2W: LOW / HIGH
2W: LOW / HIGH
2W: INACTIVE
2W: INACTIVE
2W: LOW
2W: LOW
100
80
900
850
150
200
240
750
600
400
1k
70
MUTE
LEVEL
LEVEL
LEVEL
LEVEL
MASTER
LEVEL
MASTER
LEVEL
LEVEL
LEVEL
MUTE
FREQUENCY
DELAY
DELAY
DELAY
DELAY
FREQUENCY
FREQUENCY
MUTE
MUTE
AC 23S
ACTIVE
CROSSOVER
CH 2
CH 1
FREQUENCY
LOW
MID
LOW
MID
HIGH
HIGH
MID
MONO MASTER
SUBWOOFER
SUB / LOW
HIGH
LOW
LOW / MID
MID / HIGH
LOW / MID
MID / HIGH
LOW / MID
5W: HIGH-MID / HIGH
5W: HIGH-MID
5W: MID / HIGH-MID
POWER
1 2
3
4 5
10
10
11
11
12
12
13
13
*
6
7
8 9
14
14
15
15
16
16
17
17 18
18
19
19
Summary of Contents for AC 23S
