5
REAR PANEL: STEREO 2-WAY CONNECTIONS
Observe the labels
above
the Inputs and Outputs for Stereo operation.
1.
Channel 1 Input:
Plug the left output of the mixer, equalizer, or other signal source to this input. Pin 2 is “hot”
per AES standards.
2.
Channel 2 Input:
Plug the right output of the mixer, equalizer, or other signal source to this input.
3.
High Frequency Outputs:
Connect the Channel 1 High Out to the left channel input of the high frequency
amp, and the channel 2 high out to the right channel input of the high frequency amp.
4.
Low Frequency Outputs:
Connect the Channel 1 “2W-Low” output to the left channel input of the low
frequency amplifier, and the Channel 2 “2W-Low” output to the right channel input of the low amplifier.
5.
Stereo / Mono Switch:
Set this switch to the Stereo (
out
) position.
6.
Stereo 2-Way / 3-Way Switches:
Slide the switches to the 2W position. This switch removes the low
frequency crossover from the signal path. Low frequencies are now routed to the Mid frequency output.
Note: The Low frequency outputs are still active
and may be used as additional Low outputs.
7.
Mono 4-Way / 5-Way Switch:
Set this switch to the 5W position for stereo operation.
8.
Power Input:
Connect the included power cable here. Do
not
lift the ground connection!
88
2
3 4
6
5
7
6
3 4
1
Summary of Contents for AC 23S
