R&S UPZ
Manual Operation
R&S UPL Default Setting
Operating Manual 1120.8610.14 - 0
5
36
2.4 R&S UPL Default Setting
If the switcher panel is activated for the first time after loading the R&S UPL default
setup, the channels are set to a defined default state. All channels of the two switcher
types are set to 0 in this state. If tracking is additionally activated for the first time,
tracking
B vs A
is set to "
-1
" and tracking
Out vs Inp
to "
0
". Thus it can be ensured
that channels are not unpredictably closed when the user interface is opened, which
would cause illegal states in the test setup.
Fig. 2-3
Default-Setting: R&S UPL
If the same setting as in the default state is to be obtained, it is sufficient to set any
channel to "
0
" with the tracking setting described above. All other settings are then
adapted.
