R&S NGM202 User Manual Download

Page: 89 / 177

Instrument Functions

R&S

NGL200/NGM200

User Manual 1178.8736.02 ─ 06

2. Select the required field to configure.

The R&S

NGL/NGM reset the instrument date and time accordingly.

6.16.5

Device Information

General instrument information of R&S

NGL/NGM.

► Select the "Instrument Information" to display the device information.

The R&S

NGL/NGM displays the device information dialog.

Figure 6-45: Device information dialog

Device information

Description

Model

Model of the instrument.

Instrument orderable part number.

Serial No.

Unique identification number for the instrument.

Version

Software version that is installed in the instrument.

Hardware IDs

Unique serial number of the front and mainboard of
the instrument.

Temperatures

Temperature in degrees measured in both Ch1 and
Ch2.

If the temperature exceeded the specification, "Over
Temperature Protection" (OTP) is triggered and the
respective output channel is turned off.

Misc

Temperature measures for CPU.

Fan speed and memory capacity in the instrument.

6.16.6

Update Device

General Instrument Settings

Summary of Contents for NGM202


















































































































































































Search results

Summary of Contents for NGM202

Reviews:

Related manuals for NGM202

Brands by name

Popular brands

R&S NGM202, User Manual

Search results

Summary of Contents for NGM202

Reviews:

Related manuals for NGM202

Brands by name

Popular brands