Remote Control Commands
R&S
®
NGL200/NGM200
128
User Manual 1178.8736.02 ─ 06
Example:
INST OUT1
MEAS:ENER:STAT ON
MEAS:ENER:STAT?
MEAS:ENER:STAT?
-> 1
Energy counter of Ch1 is enabled.
MEASure[:SCALar]:POWer?
Queries the currently supplied power of the selected channel.
Example:
MEAS:POW?
-> 3.00E+00
Usage:
Query only
MEASure[:SCALar]:STATistic:COUNt?
Queries the number of measurements.
Usage:
Query only
MEASure[:SCALar]:STATistic:RESet
Resets the minimum, maximum and average statistics values for voltage, current, and
power.
Additionally this command resets the measured energy.
MEASure[:SCALar]:CURRent[:DC]?
Queries the currently measured current of the selected channel.
Example:
MEAS:CURR?
-> 1.000E +00
Usage:
Query only
MEASure[:SCALar][:CURRent][:DC]:AVG?
Queries the average measured output current.
Usage:
Query only
MEASure[:SCALar][:CURRent][:DC]:MAX?
Queries the maximum measured output current.
Usage:
Query only
MEASure[:SCALar][:CURRent][:DC]:MIN?
Queries the minimum measured output current.
Measurement Commands
