background image

http://register.rainbowplay.com 

Rainbow Exclusive Lifetime Warranty

Rainbow Play Systems, Inc. warrants to the original purchaser that their Rainbow® Play System will be free from 

defects in material and workmanship for the following time periods: 

 LIFETIME WARRANTY

 Rainbow guarantees all Cedar lumber components against structural failure for the lifetime 

of the unit. Seasonal checking, surface cracks, knot holes and knots are natural characteristics of Cedar lumber and 

are not covered under our warranty.

 LIFETIME WARRANTY 

Rainbow guarantees all scoop slides, tube slides, crawl tunnels, crow’s nests, panel 

mounts, commercial swing hangers, the Rainbow® plaque, 360° tire swivels, structural hardware, Plastisol coated 

plates, Plastisol coated brackets, Plastisol coated rungs, Trapeze/Triangles and Plastisol coated handles for the 

lifetime of the unit. Cosmetic cracks and color fading of our plastic components are not covered under our warranty. 

Surface rust on structural hardware and metal components is not covered under this warranty. 

 FIVE YEAR WARRANTY

 Rainbow guarantees all tarps, ship’s wheel, rope disc, binoculars, telescope, periscope, 

megaphone, bubble window, chalkboard, flag dowels, gliders, buoy balls, tic-tac-toe panel, driving panel, talk tube, 

ship anchor, ship shelf, ship lock, wave slide, tire swing, swing seat, commercial full bucket swing, half bucket 

swing, flat swing, rock wall rocks, punching bag, solar lights, and swinging tent will be covered by our five year 

warranty. Cosmetic cracks and color fading of our plastic components are not covered under our warranty. 

 FIVE YEAR WARRANTY

 Rainbow guarantees chain ladder, chain, powder coated chin-up bar, fireman’s pole, bell, 

powder coated rungs, powder coated handles, powder coated brackets, powder coated plates, and powder coated 

corkscrew climber will be covered by our five year warranty. Surface rust on structural hardware and metal 

components is not covered under this warranty.

 ONE YEAR WARRANTY

 Ropes and Flags are covered by our one year warranty.

Rainbow’s Exclusive Lifetime Warranty, Five Year Warranty, and One Year Warranty is non-transferable.

This warranty is nullified if a residential unit is utilized in a commercial playground setting, a commercial 

environment or any commercial playground application. 

Rainbow Play Village Commercial Playground 

Equipment are covered under this warranty in commercial playground applications.

Rainbow can nullify this warranty if the unit has been subjected to vandalism, negligent or improper installation, 

failure to properly maintain the unit with periodic staining of wood and tightening of hardware, unit being subjected to 

an irrigation system, unauthorized alteration, improper use, or Acts of God. 

Your sales receipt will be needed to make a warranty claim. Rainbow will ask you for photos for your warranty claim. 

Warranty claims will be repaired or replaced as determined by Rainbow. Shipping and labor costs are not covered 

under this warranty. 

TO THE MAXIMUM EXTENT PERMITTED BY LAW: 

NO OTHER WARRANTY, EXPRESSED OR IMPLIED CAN REPLACE THIS WARRANTY. THIS WARRANTY IS 

DIRECTLY FROM RAINBOW PLAY SYSTEMS, INC. TO THE ORIGINAL PURCHASER. NO OTHER WARRANTY 

OF MERCHANTABILITY OR FITNESS FOR USE, EXPRESSED OR IMPLIED CAN REPLACE THIS WARRANTY. 

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS. RAINBOW 

DOES NOT AUTHORIZE ANY PERSON OR ENTITY TO OFFER ANY OTHER WARRANTIES FOR RAINBOW. 

Rainbow assumes no responsibility for incidental or consequential damages which may arise from the purchase or 

use of the unit. Some states do not allow exclusion or limitation of incidental or consequential damages. This 

warranty provides you with legal rights, which vary from state to state.

Please register your Rainbow® online at                                                    

to 

verify your original ownership of your 

Rainbow Play System.

131

Summary of Contents for Carnival Clubhouse








































Reviews: