23 7/8"
24"
N405
6318
6319
6317
6316
N3
6319
6318
6317
6316
H216
H216
N3
N405
PRE-DRILLED
HOLES UP
*NOTE: 4x4 Monkey Bar can only be mounted on the Carnival Clubhouse and MUST NOT have
a Penthouse mounted on it.
1. Place Left and Right Monkey Bar Arms
(6316) (6317)
and Left and Right Monkey Bar Support Legs
(6318) (6319)
on a flat surface directly across from each other with pre-drilled hole facing up (as
(shown).
2. Insert Pipes
(N3)
in to pipe holes into both Monkey Bar Arms
(6316) (6317)
to connect the two Monkey
Bar Arms
(6316) (6317)
together.
*NOTE: Monkey Bar assembly must measure 23 7/8" wide when properly assembled.
3. Ensure width of Monkey Bar assembly is
23 7/8"
wide (as shown) and insert #8 Hardware
(H216)
through pre-drilled holes in Monkey Bar Arms
(6316) (6317)
into Pipes
(N3)
, to secure Pipes in pipe
holes.
4. Insert Pipes
(N405)
in to pipe holes into both Monkey Bar Support Legs
(6318) (6319)
to connect the
two Monkey Bar Support Legs
(6318) (6319)
together.
*NOTE: Inside of Monkey Bar Support assembly must measure 24" wide when properly
assembled.
5. Ensure width of Monkey Bar Support assembly is
24"
wide (as shown) and insert #8 Hardware
(H216)
through pre-drilled holes in Monkey Bar Support Legs
(6318) (6319)
into Pipes
(N405)
, to secure
Pipes in pipe holes.
87
Step 48
4x4 Monkey Bar
Assembly
