A
2 1/2"
7060
H3
H119
H215
H9
H1
H1
H97
3327
4160
H1
H97
6320
7059
B
30 1/4"
1"
4160
3327
INSTALL 1/4" HARDWARE
(H1) (H9) (H32) (H215)
IN THIS HOLE
6320
INSET B
C
N8
H164
N8
H164
7059
H32
3327
*NOTE: Installation processes will be the same for the Wood Roof Version.
1. On the backside of Short Penthouse Side Board, insert 1/4" Hardware
(H32)
into the bottom hole of
the short side offset counter bored holes (as shown in Inset A).
2.
Position the bottom Penthouse Side Board
(3327)
, flush with the bottoms of Deck Boards, and attach
to Penthouse Corner Post
(6320)
using 1/4" Hardware
(H1) (H97)
.
*NOTE: Holes in the ends of Penthouse Side Boards (3327) (4160) are drilled at different
distances. Be sure that Side Boards are oriented as shown in Inset B.
3. Equally space and attach Short Penthouse Side Boards
(4160)
using 1/4" Hardware
(H1) (H97)
.
Spacing between remaining Side Boards will be approximately
2 1/2"
.
4. Position Penthouse Spiral Upright
(7059)
on Deck and attach through Penthouse Side Boards
(3327)
(4160)
using 1/4" Hardware
(H1) (H97)
.
*NOTE: Penthouse Upright (7059) will measure 30 1/4" from Penthouse Corner Post (6320)
when properly installed.
5. Install 1/4" Hardware
(H1) (H9) (H215)
through bottom hole of the bottom Penthouse Side Board
(3327)
, into previously installed 1/4" Hardware
(H32)
.
6. On inside of Penthouse attach three 90 Brackets
(N8)
to Penthouse Side Board
(4069)
, Penthouse
Spiral Upright
(7059)
and Deck using #14 Hardware
(H164)
(as shown in Inset C).
INSET A
4069
INSET C
105
Step 63
Penthouse Side Board
Installation (for Spiral Slide)
