A
H3
H119
6342
6302
6138 6313
6342
B
1 7/8"
1 7/8"
9222
H152
6342
6342
9223
4132
1. Position Monkey Bar Support Blocks
(6342)
against Corner Upright
(6302)
and Center Post
(6138)
(6313)
, pushed up tight to underside of Monkey Bar.
2. Attach Monkey Bar Support Blocks
(6342)
using 3/8" Hardware
(H3) (H119)
.
3. On inside of set, evenly space three Rail Uprights
(9222)
across Corner Facia
(9223)
and 6 Hole
Facia
(4132)
, in between Monkey Bar Support Blocks
(6342)
. Attach Rail Uprights using #8
Hardware
(H152)
.
*NOTE: Gaps between Rail Uprights and Support Blocks should measure approximately
1 7/8" when properly installed.
90
Step 50
Monkey Bar Support Block
& Rail Upright Installation
