A
6320
H3
H119
H3
H119
6321
6320
6320
6320
H3
H119
7056
7055
4066
H1
H97
B
7055
6320
6138
N391
N391
H104
INSET A
*WARNING: DUE TO ITS EXTREME WEIGHT, IT IS STRONGLY RECOMMENDED THAT AT
LEAST THREE PEOPLE HELP TO LIFT PENTHOUSE INTO PLACE.
*NOTE: Penthouse with Tarp is shown; installation of the Penthouse with Wood Roof will be
the same unless otherwise noted.
1. Carefully lift Penthouse on top of Monkey Bar, positioning Penthouse on top of previously installed
Deck Boards, and pushed up tight to Filler Blocks
(7055) (7056)
.
2. Attach Penthouse to Monkey Bars using 3/8" Hardware
(H3) (H119)
.
*NOTE: Bottoms of Penthouse Corner Posts (6320) (6321) should be flush with bottom of
Monkey Bar when properly installed.
3. Attach Penthouse Corner Post
(6321)
to Filler Block
(7055)
using 3/8" Hardware
(H3) (H119)
.
*NOTE: If installing Wood Roof, Penthouse Corner Post (6321) will not be attached to Filler
Block (7055).
4. Position Monkey Bar Entrapment Board
(4066)
on Monkey Bar, pushed up tight to Penthouse. Attach
Monkey Bar Entrapment Board using 1/4" Hardware
(H1) (H97)
.
5. Position Safety Handles
(N391)
against Penthouse Corner Post
(6320)
and Center Post
(6138)
, in
approximate locations shown, and attach using 5/16" Hardware
(H104)
(as shown in Inset A).
*NOTE: If installing Wood Roof, one Safety Handle will be attached to Filler Block (7055)
instead of Center Post (6138).
103
Step 61
Penthouse and Handle
Installation
