Rain Master RME EAGLE EG Series, User Manual

Page: 36 / 132

4.0 Operation Rain Master Eagle User Manual
- 30 -
4.2 KEYBOARD OPERATIONS
4.2.1 Function and Setup Keys
The Function and Setup key category is used to configure and program the controller. The
operator can enable and disable operational modes and enter, modify, and review the four
irrigation programs of the controller. The following paragraphs describe the operation of each key
ET PROGRAM
WATER
DAYS
STATIONS
START
TIMES
QUICK
STATIONS
WATER %
BUDGET
REVIEW
SETUP MANUAL
SKIP
DAYS
4.2.2 Data Entry Keys
The DATA ENTRY KEYS are used to support the selection of the various parameters used and
needed by the FUNCTION AND SETUP KEYS. The parameters would include entering the
timeof- day, the date, station numbers, start times, program number and various other values.
DATA ENTRY KEY number one (1) is used as a toggle key for a number of ON/OFF parameters,
Valve Types, Pipe Size rotation, and Enable/Disable functions.
All Data Entry actions are completed only after you press the ENTER key. The controller will
process the data, check the data validity and then accepted or rejected the data. If the data is
acceptable the controller will display “OK”, if the data is unacceptable the controller will display
“NO” and you will be required to re-enter the correct data value.
4.2.3 Command Execution Keys
The Command Execution Keys are used to complete the entry of data values, terminate data entry
and to clear unwanted parameters.
CLEAR QUIT ENTER