Rain Master RME EAGLE EG Series, User Manual

Page: 62 / 132

6.0 Setup Key Operations Rain Master Eagle User Manual
- 56 -
6.4 PUMP
The Pump feature allows you to program a Pump to be activated when program 1, 2, 3, or 4 is
activated. The controller uses Station 1 as the pump output. Use this feature only if the Pump is to
be connected to Station 1. If the pump is to be connected to the Master Valve output, then use the
Master Valve configuration feature.
Refer to wiring diagrams and explanations in the MASTER VALVE and PUMP
WIRING OPTIONS section before configuring this option.
A typical example for using this feature occurs when using a Normally Open Master Valve and
Pump combination.
If you select a Pump for any program, the controller will not allow you to include a
Station 1 runtime in any program. If you have already programmed Station 1 into a
program the controller will automatically remove it.
EXAMPLE : Configure a Pump to turn on when Programs 2 and 4 are running,
Continue to press:
SETUP
Until display indicates: pump
Press:
ENTER
Add Programs 2 and 4 to the
Pump Configuration.
Display will indicate:
pump 24
Subsequent presses of Data Entry keys 2 and 4 would remove Programs 2 and 4 from the Pump
configuration.