Rain Master RME EAGLE EG Series, User Manual

Page: 58 / 132

5.0 FUNCTION AND EXECUTION KEY OPERATIONS Rain Master Eagle User Manual
- 52 -
The controller will return to the Automatic mode.
5.10 CLEAR EXECUTION KEY
CLEAR
Usage : The controller’s CLEAR key has a number of uses, they are as follows:
1. The CLEAR key is used to remove unwanted parameters during irrigation program entry.
2. In flow monitoring operations, the CLEAR key will restart the water Totalizer counter.
3. To set the programmable Rain Shutdown Mode, press the CLEAR key; select the number
of days, from 1 to 7 that the controller will stay in Rain Shutdown Mode, and then press
ENTER to complete the action.
4. If you wish to terminate an executing irrigation program, press CLEAR, then press the
QUIT key to return to the Automatic Mode.
5. An entire program may be cleared from the controller’s memory as follows:
Press the PROGRAM key and then select a number key 1 – 4 to select the program to clear
and then press CLEAR. The entire selected program will be removed.
!
Please ensure you are clearing the proper program number prior to pressing the
CLEAR key.
!
The Programmable Rain Mode is disabled if the Rain Master Eagle Controller is in the
Communications enabled Mode. (iCentral installed and COMM is ON.)
5.11 QUIT EXECUTION KEY
QUIT
Usage : The QUIT key is used to terminate a function or program after it has already started
execution. Pressing the QUIT key will also terminate any parameter entry process and return the
controller to the Automatic Mode of operation.
5.12 ENTER EXECUTION KEY
ENTER
Usage : The ENTER key is used to complete data entry operations during setup and program
preparation. The ENTER key will inform the controller that the data entered is ready for
processing, the controller will validate the data for proper format and range and display an “OK” if
correct or a “NO” response, then re-prompt you for the correct values to be entered.