Rain Master RME EAGLE EG Series User Manual Download Page 39

Page: 39 / 132

Rain Master Eagle User Manual

5.0 FUNCTION AND EXECUTION KEY OPERATIONS

- 33 -

The Watering Days will be indicated in the STATIONS/DAYS display as they are entered. The

display will indicate Monday, Wednesday and Friday have been selected (M, W, and F).

EXAMPLE

: Remove Monday as a Water Day and add Tuesday.

Press:

WATER

DAYS

CLEAR

ENTER

The Watering Days will be indicated in the STATIONS/DAYS display as they are entered and

removed.
EXAMPLE: Review the Water Days for Program 1.
Press:

PROGRAM

ENTER

WATER

DAYS

The Watering Days will be indicated in the STATIONS/DAYS display.

Press:

QUIT

The Controller returns to the Automatic Mode.

Summary of Contents for RME EAGLE EG Series





































































































































Search results

Summary of Contents for RME EAGLE EG Series

Reviews:

Related manuals for RME EAGLE EG Series

Brands by name

Popular brands

Rain Master RME EAGLE EG Series, User Manual

Search results

Summary of Contents for RME EAGLE EG Series

Reviews:

Related manuals for RME EAGLE EG Series

Brands by name

Popular brands