Rain Master RME EAGLE EG Series, User Manual

Page: 56 / 132

5.0 FUNCTION AND EXECUTION KEY OPERATIONS Rain Master Eagle User Manual
- 50 -
5.9 REVIEW FUNCTION KEY
REVIEW
Usage : A unique feature of the Rain Master Eagle controller is its REVIEW feature. At the press
of a key, all program related information will be displayed. Each press of the REVIEW key will
advance to the next program parameter. Another way of reviewing program information is to
press and hold the REVIEW key; the information will automatically advance at a readable rate.
Removing your finger causes the information scrolling to stop. Pressing QUIT at any time will
return the controller to the Automatic Mode.
The information review will start with the last program selected by the use of the PROGRAM
function key and will continue until all information in Program 4 has been presented. As an
example, if Program 1 was the last selected program then information in Program 1 will be
displayed first, followed by Program 2, 3 and 4. If Program 3 was the last selected program then
information in Program 3 will be displayed first, followed by the information in Program 4.
The information is presented as follows:
1. The Total Watering time of the program is displayed. This is the actual watering time of
the program and takes into account all factors including the percentage adjust, any delay
time between stations (which is configured using SETUP) and any adjustments due to the
program being a Cycle and Soak program.
The displayed value is rounded up; for instance a total time of 2 hours, 12 minutes and 14
seconds will be displayed as 2 hours and 13 minutes. The display will momentarily display
TOTAL, then the watering time in hours and minutes.
TOTAL 04H 30M
2. If the flow feature was enabled, using the SETUP feature; the total gallons of water used will
be displayed next.
TOTAL GALLONS 3400
When using the REVIEW function, the total gallons screen records and updates
measured gallons every 10 seconds. It can be used to check for unscheduled flow.
3. If the Rain Sensor has been enabled using SETUP for this program then: SNSR-WET or
SNSR-DRY will be displayed.
SNSR-WET
- OR -
SNSR-DRY
4. Each of the program START TIMES will be displayed if set. If not set only the valid Start
Times will be displayed.
START TIME 1 1 3:00PM
5. Selected Water Days will be displayed in the STATIONS/DAYS display. The Program
Number and the WDAY will be displayed in the PROMPT/MESSAGE display.
1 WDAY -
6. Skip Days, displayed as SD and the number of days left until the next watering day,