Rain Master RME EAGLE EG Series, User Manual

Page: 65 / 132

Rain Master Eagle User Manual 6.0 Setup Key Operations
- 59 -
6.7 SECURITY CODE
The Rain Master Eagle controller has the capability to enter a pass code which must be entered
before any function(s) can be executed. This code can be up to 4 numbers long. Use a number that
can be easily remembered, and have it written down should you forget.
This feature should only be used where security is limited.
EXAMPLE
: To enter a new Security Code of 1960, the year you were born,
Continue to press:
SETUP
Until display indicates:
code0000
Press: ENTER
Display will indicate:
code 1960
Press: QUIT
0000 is not a valid security code. 0000 means that the security code feature is disabled.
The controller will return to the Automatic Mode.
6.7.1 Enabling Security Code
Once you have completed operating or making changes to your controller you can enable the
security code.
EXAMPLE
: Enable the Security Code feature,
Press:
MANUAL ENTER ENTER
The controller will return to the Automatic Mode.
Should you forget to enable the security code, the code will automatically become
enabled at midnight and no one will be allowed to operate the controller without first
entering the security code.
6.7.2 Disabling Security Code (LOCKED Controller)
Once the Security Code feature has been enabled, it will be necessary to enter the security code
every time you wish to operate or change your controller.
EXAMPLE : To disable the security code used in the previous example,
Press:
MANUAL ENTER ENTER
The controller will return to the Automatic Mode.