Rain Master Eagle User Manual
7.0 ET KEY OPERATIONS
- 77 -
7.4 ENTERING HISTORICAL ET MONTHLY VALUES
The Historical ET Monthly values are determined based on the location of your controller. The
monthly values represent data that has been averaged over several years on a site specific basis.
The entered data is the average daily ET (measured in inches) for each specific month. Refer to
section 8.2 OBTAINING THE HISTORICAL ET DATA.
The monthly historical values are entered once during initial configuration of the controller and as
long as the controller is not relocated, the values will not need to be changed.
The Rain Master Eagle controller uses these values during runtime calculations to average the
increase or decrease in the watering time based on seasonal changes.
EXAMPLE
: Enter a Monthly ET value for June of 18 and for July of 19.
Continue to press:
ET
Until display indicates:
etjun . 10
Press:
ENTER
Display will indicate:
etjun . 18
Press:
ET
Until display indicates:
etjul . 10
Press:
ENTER
Display will indicate:
etjul . 19
Press:
QUIT
The controller will return to Automatic Mode.
EXAMPLE
: Review the Monthly ET value for July
Continue to press:
ET
Until display indicates:
etjul . 19
Press:
ET
To review the value for August,
Press:
QUIT
The controller will return to Automatic Mode.
Summary of Contents for RME EAGLE EG Series
Page 1: ......
Page 2: ......
Page 6: ...Notes Rain Master Eagle User Manual iv Notes...
Page 132: ......
