Rail-Ability RA400 Operator'S Manual Download Page 55 | Manualshive

Page: 55 / 64

background image

DRAFT

Operator’s Manual

© Copyright 2014 - Rail-Ability Limited

Page

55

of

64

Conversion

4.

Turn off the ignition, remove the keys and lock both cab doors to secure from unauthorised use.

17.11 On and Off Tracking

Carry out the following in the order shown.

1.

Drive forwards and align the machine parallel to the track.

2.

Reverse the machine at 30° to the track from the parallel position to traverse the track.

3.

Track Access Ramps are provided on the machine and should be deployed at the positions that
the tracks will contact the rails.

4.

Straddle the track and align the rear rail axle with the track.

5.

Deploy the rear rail axle to only just lift the rear tracks slightly clear of the sleeper ends.

6.

Manoeuvre the machine to align the front rail axle with the track.

7.

Deploy the rear rail axle then deploy the front rail axle in stages to keep the machine relatively
level as it raises.

NOTE: DO NOT ATTEMPT TO MANOEUVRE THE MACHINE WITH THE CRAWLER TRACKS,
WHEN THE RAIL GEAR IS SEMI/FULLY DEPLOYED.

WARNINGS

(1)  WHEN  ON  TRACKING,  CARE  MUST  BE  TAKEN  WHEN  LOWERING  THE
BOGIE ONTO THE RAIL HEAD TO ENSURE ALL FOUR WHEELS CONTACT THE
RAIL BEFORE THE WEIGHT OF THE MACHINE IS EXERTED ONTO THE TRACK.
IF  THE  MACHINE  IS  NOT  PERPENDICULAR  TO  THE  RAIL  WITHIN  THE  RAIL
WHEEL  FLANGE  TOLERANCE  OF  THE  RAIL  AXLES  OR  SEVERE  DAMAGE  TO
THE TRACK MAY RESULT.

20m

12m

0m

3m

R12m

0m

18m

22m

25m

12m

8m

NOTE:
The dimensions
shown here are
approximate and
given for
guidance only.

«
...
53
54
55
56
57
...
»

Summary of Contents for RA400

































































Reviews:

No comments

Related manuals for RA400

Brand: Yuchai Pages: 154

Brand: Hyundai Pages: 607

Brand: Kubota Pages: 120

Brand: Daewoo Pages: 668

Brand: Takeuchi Pages: 305

Brand: jcb Pages: 24

Brand: IHI Pages: 110

Brand: Volvo Pages: 238

Brand: Komatsu Pages: 376

Brand: Komatsu Pages: 8

Brand: Werk-Brau Pages: 12

Brand: Cambridge Elevating Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands