DRAFT
Operator’s Manual
© Copyright 2014 - Rail-Ability Limited
Page
42
of
64
Conversion
Figure 30 - Total Distances Page
Choosing the “Total Distances” option from the “System Information” menu displays the information
above. All values are rail travel distances:
The Odometer reading is always incremented by any rail travel of the vehicle for the entire time
the system has been operational.
The “Trip” value is arbitrarily reset to 0 by the operator from the main screen page or if it
reaches a reading over 1000 miles.
The “From Ignition” travel distances are the only other distances besides the “Trip” meter
distance that can be reset, and are only reset when ignition is powered off.
The obviously larger recorded distances such as the odometer reading and forward/reverse travel
distances are only given as whole integers. Smaller distances such as the recorded trip distance,
distances from ignition, 24 hour average, and the “Freewheel” travel will be recorded and displayed up
to 6 significant figures (potentially 9999.99) with up to 2 decimal places.
