DRAFT
Operator’s Manual
© Copyright 2014 - Rail-Ability Limited
Page
30
of
64
Conversion
12.5 Display
NOTE:
All the operating controls for the excavator arm are the same for rail use as construction site
use, refer to the JCB JZ235 operator hand book.
Once the screen has booted up, the display changes to the Initial Screen Pages.
12.5.1 Screen Surround
Figure 10 - Screen Surround
The round buttons are F1, F2, F3 and F4 (from left to right). The four arrows are directional. The “ok”
button is required in some instances, as detailed in this document.
NOTE: All screens detailed from here, whilst within the unit housing shown above, are shown without
the surround for clarity.
12.5.2 Screen Icons
Brief descriptions of the function of each icon displayed on the screen are given in the table below.
Icon
Name
Function
Hare Speed
The hare speed icon will be displayed to
indicate the fast travel state of the machine.
Tortoise Speed
The tortoise speed icon will be displayed to
indicate the slow travel state of the machine.
Rail Axles
On the main screen page only, the rail axles
icon is displayed to identify the rail axles
control button.
Axle Lock On
The green axle lock icon is activated by the
physical lock system being currently on.
Axle Lock Off
The red axle lock icon is activated by the
physical lock system being currently off.