DRAFT
Operator’s Manual
© Copyright 2014 - Rail-Ability Limited
Page
27
of
64
Conversion
12 Control Layout
There is one set of normal (non-emergency) controls on this machine in the cab and one set of
manually operated emergency recovery controls for the rail gear outside the cab.
12.1 Cab Controls
Within the cab there are controls and displays which are detailed in the following paragraphs.
NOTES:
1.
The machine engine should not be running when grabs/attachments hydraulics are
connected and disconnected.
2
For all other functions
– refer to the JCB JZ235 operator hand book.
Figure 5 - In-Cab Controls
12.2 Emergency Stop
Disables all rail control functions and stops machine movements, see Fig.6.
Figure 6 - In-Cab Dashboard Emergency Stop Button
Bucket / Grab Diverter Activation
Red Light = Grab active
Also press and hold the top left
hand joystick button to
initialise/confirm grab mode
Tilt rotator attachment release switch
The quick hitch attachment release is operated
using the JCB systems