DRAFT
Operator’s Manual
© Copyright 2014 - Rail-Ability Limited
Page
20
of
64
Conversion
Hook up the load, checking that it does not exceed the capacity indicated on the lifting diagram
specific to each load configuration.
Make sure that the lifted load is balanced.
Avoid swinging the load above the control station. In cases where the load is too close, the
boom must be operated from the opposite side.
Do not operate with sudden movements. Activate the controls with slow and progressive
movements and rotate slowly and with care paying attention to the stability of the machine.
With vertical lift, rotate slowly in order to avoid side-skidding.
Only move the machine when the boom is in transport position.
The machine must not be left unless the load is on the ground and the booms are folded
and laid on a solid base.