PROGRAMMING THE AREARAE
4-27
4.7.2 Change User ID
To change the User ID, enter an eight-digit alphanumeric user
ID in the Program Mode. This user ID is then included in the
datalog report.
1. “Change User ID?” is the second submenu item. Press
[Y/+] and the display shows the current user ID: “User
ID=xxxxxxxx” with the left digits flashing.
2. Press [Y/+] or [N/-] to cycle through all 26 letters and 10
numerals. Press [MODE] momentarily to advance to the
next digit. The flashing digit moves to the next digit to its
right. Repeat this process until all 8 digits of the new user
ID are entered.
3. Press and hold [MODE] for 1 second to exit the data entry
mode and move to the next monitor setup submenu.
4. If there are any changes to the existing user ID, the display
shows “Save?” Press [Y/+] to accept the new user ID and
exit the monitor setup submenu. Press [N/-] to discard the
changes and move to the next submenu.
