PROGRAMMING THE AREARAE
4-23
4.6.3 Select Data Type
You can choose to store either the average or the peak value
during each datalog period.
1. When the “Select Data Type?” submenu item appears,
press [Y/+]. The display shows the current data type:
“Data Type = Average?”
2. If you press [Y/+], it accepts the currently displayed data
type and automatically goes into View Datalog. If you press
[N/-] it changes to the other data type: “Data Type =
Peak?” Press [MODE] to exit this submenu and move on
to the next submenu.
3. To change the existing selection, press [Y/+]. The display
shows “Save?” Then press [Y/+] to accept, or [N/-] to
discard and move to the next submenu.
Note:
It is necessary to select “Average” data type in order to
calculate the correct STEL and TWA data for a datalogging
report.
