PROGRAMMING THE AREARAE
4-28
4.7.3 Change Alarm Mode
There are two different alarm modes that can be selected from
the programming menu in the AreaRAE, latched and auto
reset:
1. “Change Alarm Mode?” is the third submenu item. Press
[Y/+], the display shows the current alarm mode selection:
“Alarm Mode = Latched?”
2. Press [Y/+] to accept the currently displayed alarm mode.
Press [N/-] to change to the other alarm mode: “Alarm
Mode = Auto Reset?” Press [MODE] to exit this submenu
and move to the next monitor setup submenu.
3. If there is any change to the existing selection, press [Y/+]
and the display shows “Save?” Then press [Y/+] to accept
or [N/-] to discard and move to the next submenu.
