Chapter 3 Configuration
WinLink 1000 Installation and Operation Manual
By reselecting channel, the radio starts scanning all the channels from
the available channels list and looks for radio activity in each of the
channels. It tries to select the optimal channels. If another channels is
desired the operating channel must be removed from the available
channel list.
Some product configurations support the DFS/TPC ETSI Standard. In
this standard, The Radio is detects Radars and selecting only channels
were no active Radars. According to the standard, a channel with active
Radar is prohibited for 30 minutes. Also before any transmission the
device probe the channel for Radar for a period of 60 seconds before it
can start transmission.
Figure 3-5. Link Configuration, Channel select dialog box with Automatic
Channel select
Note
3-6
Performing Configuration of WinLink 1000
Summary of Contents for WinLink 1000
Page 2: ......
