WinLink 1000 Installation and Operation Manual
Chapter 5 Diagnostics and Troubleshooting
3.
Click the check box to open the file for saving.
4.
Click the
button and in the Select File dialog box indicate in
which folder and under what name the alarm log file is to be saved,
and click OK.
5.
Set the time interval for adding data to the file.
Figure 5-1. Preferences Dialog Box, Event Log Tab
5.3
Running Diagnostic Loopbacks
WinLink 1000 supports activation of the internal and external
loopbacks on the local and remote units.
Î
To activate a loopback:
1.
From the Maintenance menu, choose Set Loopbacks.
The Loopbacks dialog box appears (see
Figure 5-2
).
2.
From the Local or Remote drop-down box, select a loopback that
you intend to run, and click OK.
A confirmation message appears.
PM
Running Diagnostic Loopbacks
5-3
Summary of Contents for WinLink 1000
Page 2: ......
