WinLink 1000 Installation and Operation Manual
Chapter 3 Configuration
Figure 3-4. Link Configuration, Channel select dialog box
Selecting the Manual option provides the capability to configure the
channel in 5 MHz steps in the specified band of the product.
Some of the products support the Automatic channel selection. The
mode is activated in normal operation mode. During installation the
user must select the channel manually in order to optimize the antenna
alignment. Enabling automatic channel selection is perform be clicking
on the Automatic channel selection check box. After selecting this
mode, the available channel list is enabled, and the user can select
which channels are used for the automatic selection (at least two
channels must be selected). The reselect channel button is used to
change to a new channel from the available channels list.
Note
Performing Configuration of WinLink 1000
3-5
Summary of Contents for WinLink 1000
Page 2: ......
