WinLink 1000 Installation and Operation Manual
Chapter 2 Installation and Setup
Installation and Setup
2-19
Î
To connect user equipment to the IDU:
1.
Connect user E1/T1 traffic to the appropriate IDU panel RJ-45 port
designated Trunk. Refer to
Appendix A
for the connector pinout.
2.
Connect user hub/router or any other compatible device to the
appropriate IDU panel RJ-45 port designated LAN. Refer to
Appendix A
for the connector pinout.
IDU-C has an integrated LAN switch that provides 2 ports of
10/100BaseT. The integrated LAN switch does not support spanning
tree.
The two LAN ports can be connected to two separate LAN segments,
but connection of both LAN ports to the same LAN segment will create
a loop that floods the network. Therefore, this configuration is
prohibited.
Use a straight cable for router connection.
Note
Note
Summary of Contents for WinLink 1000
Page 2: ......
