RADWAG PS 3000.R2 User Manual Download

Page: 10 / 191

- 10 -

2. TRANSPORT AND STORAGE

2.1. Delivery check

Please check the packaging immediately upon delivery and check instrument’s

condition directly upon unpacking for any visible signs of external damage.

2.2. Packaging

Please retain all parts of the original packaging should the balance be

transported in the future. Only the original packaging should be used for

shipping the balance. Before packing, disconnect all attached cables and

remove any loose/movable parts (weighing pan, anti-draft shield, etc.). Please

place balance and its components in their original packaging, and protect them

against damage during transport.

Summary of Contents for PS 3000.R2
































































































































































































Search results

Summary of Contents for PS 3000.R2

Reviews:

Related manuals for PS 3000.R2

Brands by name

Popular brands

RADWAG PS 3000.R2, User Manual

Search results

Summary of Contents for PS 3000.R2

Reviews:

Related manuals for PS 3000.R2

Brands by name

Popular brands