- 41 -
10.2. Selecting start unit
Upon selection of start unit, the balance activates with the specified unit for
these modes where change of the unit is possible.
Ability of selecting a given unit depends on the balance status, i.e. if the balance
is verified or not.
Procedure:
10.3. User’s unit
The user may declare two units. The user unit is a result of indication multiplied
by coefficient given for the user unit.
The units are displayed as
[u1]
– user unit 1, and
[u2]
– user unit 2.
Declaration of a coefficient for the user unit is presented below.
User units are available only for verified balances.
