- 88 -
17.2.2.
Means of operation
CAUTION: a special kit intended for measurement shall be installed prior
to using <CARAT CONTENT> mode. For kit assembly instruction go to
section 4.
Enter <CARAT CONTENT> mode
pictogram signals entering the <CARAT CONTENT> mode.
17.2.3.
Testing carat content of an unspecified alloy
Run the function:
First select <CARAT CONTENT> procedure, next set parameters needed for
calculation of tested alloy carat content. The procedure steps are presented in a
form of prompts displayed in the bottom line of the balance screen.
